the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 Altima, amp to stock head unit


Post ReplyPost New Topic
< Prev Topic Next Topic >
ford4lyf 
Member - Posts: 2
Member spacespace
Joined: January 30, 2006
Location: United States
Posted: January 30, 2006 at 9:28 PM / IP Logged  
I was planning to install subs to this car w/o changing the hd or speakers. My question is after installing the amp (connecting it to the bat. and the ground and the remote...ect.) wut do i do about getting the signal from the stock hd to the amp...i know on an aftermarket hd...you just connect the rca's to the back of the hd but on a stock hd there isnt anywhere to put rca's. Thanks
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: January 30, 2006 at 10:12 PM / IP Logged  

Since they're already in the trunk (I'm assuming that's where everything's going), just tap into the rear speaker wires and connect a line out converter.  Then you'll just run RCA cables out of that to your amp.

My ex once told me I have a perfect face for radio.
ford4lyf 
Member - Posts: 2
Member spacespace
Joined: January 30, 2006
Location: United States
Posted: January 31, 2006 at 5:57 AM / IP Logged  
thanks alot....someone has actually told me that but i didnt know whether to believe him or not. Thanks for your help

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer