Alpine CDA-9855 Eject problem

Home / the12volt's Install Bay / Car Audio / Alpine CDA-9855 Eject problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

thurston23

Member - Posts: 6

Joined: March 26, 2006

Posted: March 26, 2006 at 12:13 AM / IP Logged

Hello

I've got a Alpine CDA-9855 and its giving me some problems when i try to eject a cd. The cd will come about a 1/4" out of the slot and get stuck there. The deck is about 8 months old and its the only problem its ever giving me. If anyone can help that would be great.

Thanks

mad550

Copper - Posts: 201

Joined: February 23, 2006

Location: Australia

Posted: March 26, 2006 at 6:59 AM / IP Logged

Sounds like you've got a couple of stripped or rounded teeth in the eject mechanism, its close to the front 2 rubber rollers then look to one side and you'll see them.

WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

gi jesus

Member - Posts: 39

Joined: November 28, 2004

Location: Canada

Posted: March 26, 2006 at 2:45 PM / IP Logged

Had the same problem in my cda-9811, sent it out for warrenty work and it was a spring/washer/nut that came loose from inside the eject mechanism somewhere, but it everyonce and a while still will not eject a cd, i think it depends (if using blank cds) what brond of cd you use sometimes.

'92 ford ranger

2 swe-1041 alpine 10"s

1 Vented enclosure

1 alpine 9811 HU

1 kenwood kac-8152d

thurston23

Member - Posts: 6

Joined: March 26, 2006

Posted: April 01, 2006 at 12:45 AM / IP Logged

Hi thanks for the help. I had it into a electronics shop this week and they couldnt find a problem with it anywhere. So i dont understand where the problem would be. thanks though for the ideas

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine CDA-9855 Eject problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.