no sound after upgrade

Home / the12volt's Install Bay / Car Audio / no sound after upgrade (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jdiazj1

Member - Posts: 21

Joined: July 07, 2005

Location: United States

Posted: April 02, 2006 at 1:10 PM / IP Logged

hello, I own a 98 navigator and wanted to install an aftermarket radio to it. I know that it has a 'premium sound' system so i purchased this

and this

ok so my problem is this, after I wire everything and plug in the radio, the radio turns on but there is no sound. I play around with the Interface Adapter, setting different gains and such and still no sound. I grabbed a set of speaker cable and put a battery to the ends so i could here the hiss and nothing. what could be my problem, thanks

jdawg

sk8ingsmurf

Copper - Posts: 198

Joined: March 18, 2004

Location: United States

Posted: April 02, 2006 at 1:47 PM / IP Logged

My recommendation would be to ditch the interface adapter and just bypass the amp altogether. It sounds like somehow the amp is the source of your problem, or possibly the interface adapter you are using to integrate it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no sound after upgrade

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.