97 explorer

Home / the12volt's Install Bay / Car Audio / 97 explorer (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jsfromca

Member - Posts: 4

Joined: May 17, 2002

Location: United States

Posted: January 05, 2003 at 12:27 PM / IP Logged

I am trying to install an alpine head unit in my 97 explorer sport. I hooked up the harnesses that were pluged into the radio to the wire harnesses that I bought. The radio turns on but no sound comes out of the speakers. I noticed that the wire that end up at the speakers are a different color than the wires that plug into the head unit. is there a module that I must bypass in order to make the speakers work? Do I have the wrong harness? Must i wire the speakrs directly to the head unit?

Jovan

Jovan Silva

brianh

Silver - Posts: 518

Joined: August 25, 2002

Location: United States

Posted: January 05, 2003 at 1:53 PM / IP Logged

you probably have the nicer JBL sound system. All you need to do is to hook the remote turn on lead into the harness from the radio. That way the factory amp will come on and you will hear sound. Good luck Brian

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 explorer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.