the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Which battery to choose?


Post ReplyPost New Topic
< Prev Topic Next Topic >
dubzino 
Member - Posts: 32
Member spacespace
Joined: June 23, 2006
Location: Canada
Posted: September 11, 2006 at 9:25 AM / IP Logged  
Hey guys I am back again for some of that good advice. I am upgrading my battery under the hood to one of those kinetic ones. I have a 2001 Infiniti i30 with a 120 stock alternator. DO I have to match the amps of the new battery to the one I am replacing? Or can it be much higher and not casue any problem. I would hate to put a battery that might be too strong for my car and wreck something.Thanks
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: September 11, 2006 at 9:41 AM / IP Logged  
No. No problem... the car will only pull as much current as it needs, REGARDLESS of the amp-hour rating or current capacity of the battery...
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
dubzino 
Member - Posts: 32
Member spacespace
Joined: June 23, 2006
Location: Canada
Posted: September 11, 2006 at 3:20 PM / IP Logged  
Ok great. But I am guessing if I go get one of those huge 1600-2200 amp batteries. That is not good for my alternator? Or will it be fine? Does that mean the bigger the battery the harder the alternator has to work?
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: September 11, 2006 at 4:30 PM / IP Logged  
Your guessing wrong.  It will not harm your alterantor. It will be fine, the fun part will be trying to fit a battery that big in the factory battery trayWhich battery to choose? -- posted image..
dubzino 
Member - Posts: 32
Member spacespace
Joined: June 23, 2006
Location: Canada
Posted: September 11, 2006 at 6:47 PM / IP Logged  
Yea well my factory battery is pretty huge but yea I dont think I need one of those huge 2000 amp ones. So its the more amps the battery is the longer you can play the stereo when the car is off right? So when the car is on does having more amps in your battery make any special difference in anything? And the Kinetic batteries seem to say they have the best density. So that means your volts will nto drop as low when the bass hits being more dense if i understand correctly?
bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: September 12, 2006 at 1:40 AM / IP Logged  

Yeah but if you have an aftermarket sound setup, it's not recommended.

As for part two (special differnces) you will be able to hit the system harder for longer periods without risking the system.

As for Kinetic's claim... It varies based on construction, materials, etc. of the battery. As for voltage drop, how many amps are you drawing for your sound system? If you are worried about voltage drops during the peaks, get a stiffening capacitor for your system (about 1 farad for every 1000 watts) For the most part, their claim is MOSTLY true. There are a few other brands that can do the job just as good.

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: September 12, 2006 at 6:40 PM / IP Logged  
Suggesting a cap?? Yeah sure...it'll provide power for about .000045 seconds before it is drained during hard bass drops
dubzino 
Member - Posts: 32
Member spacespace
Joined: June 23, 2006
Location: Canada
Posted: September 13, 2006 at 5:16 AM / IP Logged  
bellsracer wrote:

Yeah but if you have an aftermarket sound setup, it's not recommended.

As for part two (special differnces) you will be able to hit the system harder for longer periods without risking the system.

As for Kinetic's claim... It varies based on construction, materials, etc. of the battery. As for voltage drop, how many amps are you drawing for your sound system? If you are worried about voltage drops during the peaks, get a stiffening capacitor for your system (about 1 farad for every 1000 watts) For the most part, their claim is MOSTLY true. There are a few other brands that can do the job just as good.

Yea I already have a ten farad but it doesnt help. So ar eyou suggesting I replace my front battery with a deep cycle?
dubzino 
Member - Posts: 32
Member spacespace
Joined: June 23, 2006
Location: Canada
Posted: September 13, 2006 at 2:25 PM / IP Logged  
And also my amp is drawing 80 amps and probably close to full draw as I am running it at 1 ohm mono.
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: September 14, 2006 at 12:51 AM / IP Logged  
Kinetik is a great battery....while Audioforce is just the same quality battery with better customer service
Im just starting what I have learned over the period of the last year and a half...Kinetik disrespected myself, my girlfriend and another competitor all withen a 3 month span...bassically selling us product, and then not honoring the warranty they said the products would have.   I hate to drag personal problems with a company onto this fourm, but I have to state what I know, as that is what I am here for!
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer