Sub Enclosure

Home / the12volt's Install Bay / Car Audio / Sub Enclosure (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: February 03, 2003 at 10:57 AM / IP Logged

I have 2 VDO subs at 10 in dia.

Can annyone please tell me what volume my enclosure should be with a sealed box.

The specs are below!

Subwoofer: ø 250 mm

Max./Nom. Power: 800 Watts/300 Watts

Impedance: 4 Ohm

Frequency Response24 Hz - 400 Hz

Sensitivity: 92 dB/w/m

fakepete

Copper - Posts: 99

Joined: April 21, 2002

Location: United States

Posted: February 03, 2003 at 11:58 AM / IP Logged

I couldn't find any of the T/S specs on the webpage, just the same info you have listed above. If I had to take a guess at it, I'd say somewhere between .75 - 2 cubic feet per sub. You could build the box a little large and then experiment by adding blocks to reduce the volume until you find what sounds best. Sealed boxes are pretty forgiving when it comes to volume.

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: February 04, 2003 at 2:53 AM / IP Logged

Cheers fakepete

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Sub Enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.