the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

upgrade suggestions


Post ReplyPost New Topic
< Prev Topic Next Topic >
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: April 10, 2007 at 12:10 AM / IP Logged  

For my bass I currently have a LanzarVibe241 stereo on (2) 4Ohm KickerComp 10's. Also a JensenJPA285 bridged on (1) 4Ohm RF P1 12".     (Non-CEA 250wrms on each 4Ohm KickerComp 10" and 250wrms on 4Ohm RF P1

I'm about to get an MTX 421D. Should I:

1. (2) 4Ohm KickerComp 10's in parallel on the MTX 421D and (1) 4Ohm RF P1 bridged on LanzarVibe241.     (425wrms split between KickerComp 10's, Non-CEA 400wrms on RF P1 12")

2. (1) 4Ohm RF P1 on MTX 421D and (2) 4Ohm KickerComp 10's stereo on LanzarVibe241.                            (200wrms on RF P1 12, Non-CEA 400wrms split between (2) KickerComp 10's)

3. Leave current setup.

I know you guys can help me achieve better bass, thanks!

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: April 10, 2007 at 1:08 AM / IP Logged  
jmelton86 wrote:

For my bass I currently have a LanzarVibe241 stereo on (2) 4Ohm KickerComp 10's. Also a JensenJPA285 bridged on (1) 4Ohm RF P1 12".     (Non-CEA 250wrms on each 4Ohm KickerComp 10" and 250wrms on 4Ohm RF P1

I'm about to get an MTX 421D. Should I:

1. (2) 4Ohm KickerComp 10's in parallel on the MTX 421D and (1) 4Ohm RF P1 bridged on LanzarVibe241.     (425wrms split between KickerComp 10's, Non-CEA 400wrms on RF P1 12")

2. (1) 4Ohm RF P1 on MTX 421D and (2) 4Ohm KickerComp 10's stereo on LanzarVibe241.                            (200wrms on RF P1 12, Non-CEA 400wrms split between (2) KickerComp 10's)

3. Leave current setup.

I know you guys can help me achieve better bass, thanks!

Lost cause.

jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: April 10, 2007 at 1:22 AM / IP Logged  

C'mon, now! I know all the numbers can be confusing, but this is what i've got to work with. Please give your opinion on what I should do.

Thanks.

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: April 10, 2007 at 1:49 AM / IP Logged  

Ok. Ditch all that gear. Sell it, then save your money. Then after you have some money, buy your self a well thought out setup. If you are just looking for some loud bass, fine. Get your self some kicker L what evers or some MTX bass slamming one note wonders.

I've been where you are, and the only way to achieve what you truely want will cost you a little more than what you have invested. And get it installed professionally.

jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: April 10, 2007 at 2:02 AM / IP Logged  

The thing is, this was all Very cheaply acquired. Someone's is giving me the MTX 421D. I'm satified with my current setup, about 650wrms (below 80Hz), but the 421D sure would be better than one of the two crap amps I have. I install everything myself (I really thought I knew what I was doing before joining the12volt.com, BTW) so this question is really based on my budget- which isn't much at all.

With budget of $0 (I'm plenty satified with what I have -plenty of wiring, too), I need to know which setup I suggested will have the most output.

I know you all want to write 'throw it all away and save up for real equipment', but I have Alpine and Clarion power for above 80Hz so i'm not as worried about having 'crappy' bass brands.

??? Any suggestions are highly regarded. Unless, of course, I disregard them upgrade suggestions -- posted image.. Thanks.

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
coppellstereo 
Silver - Posts: 785
Silver spacespace
Joined: November 21, 2005
Location: United States
Posted: April 10, 2007 at 3:15 AM / IP Logged  
if you want to keep what you have, just try different configurations with the same song or test tone at the same volume and see which one you like best.
You will run into cancellation issues with different woofers, so you might have to play around with it. Also, woofer aiming could help you out here - what kind of car do you have?
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: April 10, 2007 at 3:29 AM / IP Logged  

I have a '95 Cavalier. I currently have the 3 woofers in sealed (rather small) boxes faced down on 4x4's with the front closed off, the only way for air to move is toward the rear. This made a huge difference in both SQ and SPL, gaining both, opposed to rear facing. This is my favorite way to face them, even though none of the 3 (2 Comp 10's, 1 RF P1 12") are 'sag worthy'.

I just figure that the first option I listed [LanzarVIbe241 bridged on RF P1 12", MTX 421D 2Ohm (2 10's in parallel)] would give me more bass then the way I have it now (LanzarVibe241 stereo on Comp 10's, JensenJPA285 bridged on RF P1 12").

Thanks for Any input.

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: April 11, 2007 at 1:00 AM / IP Logged  

Anyone?

Thanks

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
coppellstereo 
Silver - Posts: 785
Silver spacespace
Joined: November 21, 2005
Location: United States
Posted: April 11, 2007 at 4:21 AM / IP Logged  
if the amp is cheap enough it would be an upgrade from your jensen amp. I wouldnt hesitate to try it.
In a trunk-car rear facing subs seem to generally perform better than any other configuration. Are all of your subs in the same enclosure?
tdsteele 
Silver - Posts: 393
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 22, 2003
Location: United States
Posted: April 11, 2007 at 4:26 AM / IP Logged  
I would replace the jensen with the MTX definately, better amp, quality, more power, would have to help you somewhat. Put you closer to the subs rating as well, just my thoughts.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer