big 3 upgrade

Home / the12volt's Install Bay / Car Audio / big 3 upgrade (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

amb7247

Member - Posts: 3

Joined: August 03, 2007

Location: United States

Posted: August 03, 2007 at 12:34 AM / IP Logged

I have a 1994 Chevrolet Camaro V6 3.4L and was curious about wire to alt and where would I begin to find the engine ground to chassis wire, i have no idea where that would be located.

Is it just one wire going from the positive to the alternator? What about the big plug that plugs into it? That's my first question. As for the second on the location and hookups from the engine ground to chassis. Thanks.

Aaron

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: August 07, 2007 at 9:16 PM / IP Logged

http://www.s10planet.com/forum/showthread.php?t=8584

Its for the S-series trucks (Chevy S-10, GMC Sonoma...etc.). The Camaro shouldnt be much different, but thats the best write-up you will find of the "big 3".

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

big 3 upgrade

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.