programming viper 5900

Home / the12volt's Install Bay / Car Security and Convenience / programming viper 5900 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

matrixlu

Member - Posts: 17

Joined: November 10, 2004

Location: United States

Posted: May 11, 2008 at 4:10 PM / IP Logged

Hey.

so I was programming my viper 5900. i turned the ignition key to the on position, then off position and pressed the valet button until it chirped once. i then let go and the alarm sounded for 1 second and then cut itself off.

What does this mean? what did i program to the system? did i mess it up?

thanks

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: May 12, 2008 at 12:18 AM / IP Logged

Assuming your door trigger is working properly, and the door was open at the time, that alarm sound probably meant:

1. You had selected the menu you wanted and could press the valet switch to select the particular feature you wanted to change, or

2. The learn routine had timed out(if it was 15 seconds or more).

If you didn't press any buttons on the remote, there's no possibility that you changed anything, and you definitely didn't mess anything up just by doing what you said there.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming viper 5900

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.