motion,shock,audio,piezo,siren,dei

Good Day Guys!

Please see drawing for more detail.

Question: Is the diagram ok? Will it not make any harm to my vehicle?

I want piezo siren to be activated only during FULL ALARM, but in warn away only the 6 Channel Siren will sound.

Please help! Thank you!

Sterling_Silver

Guys!

Forgot to tell why I'm doing this.

Reason is that everytime I Lock my car (Mitsubishi Galant 04) the Siren will chirp so the Piezo Siren(I wired the 6 channel siren with the piezo without any interface). Since I have a Audio Sensor inside of my car, it picks up the sound of the piezo siren. When this happen, a bypass chirp will be heard.

Another reason, When the warn away Motion sensor is activated, Piezo siren and 6 Channel siren will sound also.Audio sensor pick this up and gives me a false full alarm on my 2 way lcd remote.

Hope to hear from anyone. Thank you!

Sterling_Silver

It's quite correct assuming blue is outer zone, I cqan't remember! .By convention main siren should be at 87 and mini at 30 but in this case it doesn't matter. Diodes are correct, incidentally it is poss to run an audio sensor with a dual zone you end up adjusting sensitivity down to zero! Previous G4 Concept 500 (UK) had both and we never used the audio (glass break) for this reason. Howard owner of a run in to the ground (30,000 miles last year) 2000 Galant with G4 Alarm, Intellistart, Intellivoice, solenoid trunk release (to lazy to reach down to the floor lever) and what double din sat nav do we fancy this week?