2006 range rover, alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 range rover, alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

f1scc

Member - Posts: 2

Joined: October 27, 2008

Location: Alabama, United States

Posted: October 27, 2008 at 3:15 PM / IP Logged

I need wiring info for alarm and remote start for this vehicle please. Or if it is the same as the 07

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 27, 2008 at 4:44 PM / IP Logged

Yes and don't even try it.

f1scc

Member - Posts: 2

Joined: October 27, 2008

Location: Alabama, United States

Posted: October 27, 2008 at 5:41 PM / IP Logged

actually i found it on bulldog s site and it is the same as an 05. I have it working now. It is just a pain you have to pull the entire center console out. You have to diode isolate all the door triggers. And you have to wire up relays for the one wire door locks. As soon as I am done i am going to post it up. The tach wire and ignition wiring is all standard. And you have to use an immobilizer bypass. The one that wraps around the ignition switch.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 range rover, alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.