the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5701, 89 vw vanagon


Post ReplyPost New Topic
< Prev Topic Next Topic >
mk1coupe 
Member - Posts: 5
Member spacespace
Joined: November 01, 2008
Location: British Columbia, Canada
Posted: November 01, 2008 at 1:29 PM / IP Logged  
i am putting in a remote start/car alarm (Viper 5701) in my 89 VW Vanagon. i beileve it has 3 wire locks, will i need relays to drive these locks or can i just use the output from the alarm?
thanks.
mk1coupe 
Member - Posts: 5
Member spacespace
Joined: November 01, 2008
Location: British Columbia, Canada
Posted: November 01, 2008 at 2:20 PM / IP Logged  
i have read the install manual a couple time now and need a little help please.
Q. there is a wire called "Light Flash - isolation wire - pin 87a of onboard relay"
i assume this will flash my parking lights?
there is also a wire called "parking light output" what is this for? do i connect both?
Q2. i have ground trigger door switches installed in the van. and i know what wire to connect them to on the alarm but there is also a "(-)200mA dome light output". can i connect these to the same wire? as the dome light is driven off the grounding door switch..
TIA
mk1coupe 
Member - Posts: 5
Member spacespace
Joined: November 01, 2008
Location: British Columbia, Canada
Posted: November 01, 2008 at 2:21 PM / IP Logged  
does anyone know if these are 3 wire or vacuum? where the relays are in a vanagon?
brhaugen 
Copper - Posts: 275
Copper spacespace
Joined: September 30, 2005
Location: North Dakota, United States
Posted: November 01, 2008 at 10:18 PM / IP Logged  
My info says to add an actuator to the drivers door.
Brent Haugen
Fargo, ND
mk1coupe 
Member - Posts: 5
Member spacespace
Joined: November 01, 2008
Location: British Columbia, Canada
Posted: November 02, 2008 at 1:13 AM / IP Logged  
that means 2 relays AND another actuator.
cant it be done with just the relays?
brhaugen 
Copper - Posts: 275
Copper spacespace
Joined: September 30, 2005
Location: North Dakota, United States
Posted: November 02, 2008 at 7:09 AM / IP Logged  
It says add an actuator - that is all it says.
Yes, you need relays - you should be able to find a diagram in the "diagrams" section under door locks.
Never done one - sorry.
Brent Haugen
Fargo, ND
mk1coupe 
Member - Posts: 5
Member spacespace
Joined: November 01, 2008
Location: British Columbia, Canada
Posted: November 02, 2008 at 11:20 AM / IP Logged  
any tips on where to buy relays and actuators online?
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: November 02, 2008 at 5:36 PM / IP Logged  
mk1coupe wrote:
any tips on where to buy relays and actuators online?
PartsExpress.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer