the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

toyota 2002 camry


Post ReplyPost New Topic
< Prev Topic Next Topic >
caibua 
Member - Posts: 3
Member spacespace
Joined: March 13, 2003
Location: United States
Posted: March 23, 2003 at 2:28 PM / IP Logged  

I installed car alarm for my toyota 2002 camry which has remote entry.

Using its original remote to lock and unlock door which has a nice soft chirp ( I like the sound).

but now I have to use the new remote from car alarm which can not get that soft chirp any more.

Any body know which wire to connect to that or how to make using

the car alarm remote to arm and disarm which still able to get a soft chirp form the manufacture remote entry.

Thank you!

djfearny2 
Silver - Posts: 810
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2002
Location: United States
Posted: March 23, 2003 at 2:36 PM / IP Logged  
you have to uninstall that alarm and buy a upgrade alarm it is something that works off of a factory alarm by using the lock motor wires in the car to arm and disarm.
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: March 23, 2003 at 2:48 PM / IP Logged  
He's right---you should have simply installed a "keyless upgrade" alarm, then you could have just carried your factory remotes around.
I'm pretty sure the factory "beeper" is somewhere around the right-front fender. If your alarm has a horn-honk output, you may be able to somehow get this to drive the beeper, and then go into your alarm's programming menu to disable the siren chirps.
caibua 
Member - Posts: 3
Member spacespace
Joined: March 13, 2003
Location: United States
Posted: March 23, 2003 at 8:51 PM / IP Logged  

Thank you all for your suggestion.

Chris! I think you are right about the location of the beeper. So that , there is a wire connect back to dash inside the car .  It would be help if somebody know which wire is that?

Thank you again.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, July 18, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer