damaged clifford wizard serial port

Home / the12volt's Install Bay / Car Security and Convenience / damaged clifford wizard serial port (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

i-vtec

Member - Posts: 23

Joined: January 06, 2009

Location: United Kingdom

Posted: August 30, 2009 at 6:13 PM / IP Logged

i was rushing and didnt notice i need a male to female adaptor etc. So i pulld the serial port side of the cable and damaged it.

Does and one have a wiring diagram for the interference circuit, so i can wire a new cable 2 it,and can i use a usb cable,

Its a 3 wire.

Please email me as its my first time on here,

i.vtec@hotmail.co.uk

Thank you

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 30, 2009 at 6:15 PM / IP Logged

No and that will teach you not to use Wizard. It takes years of using Wizard Pro to seriously screw up your alarm. Frankly it's quicker and safer to programme manually.

i-vtec

Member - Posts: 23

Joined: January 06, 2009

Location: United Kingdom

Posted: August 30, 2009 at 10:47 PM / IP Logged

im confussed.

Why is it difficult, i find it hard programing manually.

I will get a new serial port lead and solder wires on da clifford interference device.

Has any one have a basic guide on how to use the wizard program.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 31, 2009 at 2:54 AM / IP Logged

No, you can't use a USB, if you find it hard manually programming, please don't try Viper or the latest Cobra. I can assure you that Wiz Pro programming, and there are about 3 versions all work better with different versions. But they are all heavily glitched, try to programme crank time or tach on a G5 unit, it wil either not store or you will find all your papameters have changed, such as you now have passive arm and lock, hence my previous comment about years of experience.

They never issued a guide to programming and what did you mean by "da Clifford interferance device"?

i-vtec

Member - Posts: 23

Joined: January 06, 2009

Location: United Kingdom

Posted: September 01, 2009 at 4:19 AM / IP Logged

howie ll wrote:

They never issued a guide to programming and what did you mean by "da Clifford interferance device"?

pm'd you howie

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

damaged clifford wizard serial port

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.