clifford ignition control door lock

Hi,I just installed a clifford matrix 1x alarm system in my 95 toyota land cruiser and want to disable the auto lock/unlock feature. I searched for a while but did come up with anything and didnt see the instructions on how to do it in the manual. Any input on the instructions would be greatly appreciated.

Read the manual again. It's in the programming.A DMM is a beautiful thing.

MECP Advanced Installer Certified.

all it says is:The ignition controlled door lock feature on or off; with this feature on the doors will lock three seconds after the ignition is turned on, and the doors are closed, and unlock when the ignition is turned off. The system will not lock the doors when the ignition is turned on with any doors open. The bitwriter is not needed to program these separately, it should be in the programing grid to do these 2 independently. Ignition lock and unlock are independent and can be programed separately.95 Toyota Land Cruiser Clifford Matrix 1x

05 Subaru Impreza WRX STi

Look where it says feature menus a few pages back, and it should tell you how to get into the different features and wahtnot just like you would when you change runtime and stuff such as that.A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Basic features, steps 3 and 4.

Yeah, sorry I was looking in the owners manual, not the instillation guide Thanks for your help.95 Toyota Land Cruiser Clifford Matrix 1x

05 Subaru Impreza WRX STi