the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5101 in a 2005 gmc envoy

Home / the12volt's Install Bay / Car Security and Convenience / viper 5101 in a 2005 gmc envoy (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
rickyk00 
Member - Posts: 3
Member spacespace
Joined: December 28, 2009
Location: Pennsylvania, United States
Posted: December 28, 2009 at 8:59 AM / IP Logged  

Hi all,

I am having a hard time figuring out the install of a viper 5101 in a 2005 GMC Envoy. I also have the XK06-PKG7 bypass. I am planning on connecting the XK06 via the D2D interface. I am looking for help on which wires need to be connected and which ones don't. I am very disappointed in the information viper has on this install. I do understand it is made for all cars on the market, but not a lot of additional help for the DIYer. Anyway... I would like to use the starter, door locks, and factory alarming with this, and maybe the rear defroster. I have installed some of the wiring, but did not connect the controll unit yet, untill I get some questions answered. I guess lets start at the beginning: ( Note: All of my comments are started with *** in bold italic)

H1 12 pin connector:

H1-1 RED / WHITE Trunk release  ***N/A IN ENVOY

H1-2 RED 12v constant RED IGN HARNESS  ***WIRED TO 12V CONSTANT
H1-3 BROWN Horn output BLK/YLW IGN HARNESS ***WIRED TO BLK/YLW IGN HARNESS
H1-4 WHITE/ BR Light flash isolation wire N/A  ***DO I NEED THIS???
H1-5 BLACK Chassis ground GROUND CHASSIS ***GROUNDED
H1-6 VIOLET Door trigger input  ***DO I NEED THIS???
H1-7 BLUE Factory horn input N/A ***DID NOT CONNECT
H1-8 GREEN Door trigger input N/A ***DO I NEED THIS?
H1-9 BLK/WHT Dome light output  ***DO I NEED THIS?
H1-10 WHITE/ BLUE Turbo timer input N/A ***DID NOT CONNECT
H1-11 WHITE Parking light output BLK/GRAY @ SWITCH (-) ***NOT 100% WHERE TO CONNECT
H1-12 ORANGE Ground when armed output N/A ***DID NOT CONNECT
H2 7 PIN CONNECTOR:

H2-1 LT GRN/BLACK Factory alarm disarm output  ***WHERE DOES THIS GO??

H2-2 LT GRN/WHITE Factory alarm arm output  ***WHERE DOES THIS GO??
H2-3 WHITE/ VIOLET Aux 1 N/A ***DID NOT CONNECT
H2-4 VIOLET/BLACK Aux 2 N/A ***DID NOT CONNECT
H2-5 WHITE/ BLACK Aux 3 N/A ***DID NOT CONNECT
H2-6 LT BLUE 2nd unlock output N/A ***DID NOT CONNECT
H2-7 GRAY/BLACK Diesel start input N/A ***DID NOT CONNECT

H3 8 PIN CONNECTOR:

H3-1 PINK Ignition 1 input/output PINK@IGN HARNESS ***CONNECTION MADE

H3-2 RED / WHITE Ignition 2 input RED / WHITE@IGN HARNESS ***WIRED TO 12V CONSTANT
H3-3 ORANGE Accessory output ORANGE / BROWN IGN HARNESS ***NOT CONNECTED TO ANYTHING YET.
H3-4 VIOLET Starter output YELLOW@IGN HARNESS ***CONNECTION MADE
H3-5 RED Ignition 1 RED@IGN HARNESS ***WIRED TO 12V CONSTANT
H3-6 PINK/WHITE Ignition 2 output WHITE@IGN HARNESS  ***NOT CONNECTED TO ANYTHING YET.
H3-7 PINK/BLACK Flew Relay input N/A  ***NOT CONNECTED TO ANYTHING YET.
H3-8 RED / BLACK Fused accessory/starter input N/A ***WIRED TO 12V CONSTANT

RS INPUT 5 PIN CONNECTOR:

1 BLACK/ WHITE Neutral safety switch GROUND @ CHASSIS ***GROUNDED

2 VIOLET/WHITE Tachometer WHITE @ CLUSTER ***WIRED TO WHITE WIRE IN BLUE PLUG FOR ECM
3 BROWN Break shutdown input WHITE @ PRK SWITCH ***NOT CONNECTED TO ANYTHING YET.
4 GRAY Hood pin switch VIPER SWITCH ***NOT CONNECTED TO ANYTHING YET, BUT WILL RUN
5 BLUE/WHITE 2nd rear defogger N/A ***NOT CONNECTED TO ANYTHING YET.

RS AUXILIARY OUTPUT 5 PIN:

1 PINK/WHITE (-) 200mA FLEX RELAY CONTROL OUTPUT***DID NOT CONNECT

2 ORANGE (-) 200mA ACCESSORY OUTPUT***DID NOT CONNECT
3 VIOLET (-) 200mA STARTER OUTPUT***DID NOT CONNECT
4 PINK (-) 200mA IGNITION 1 OUTPUT***DID NOT CONNECT

5 BLUE (-) 200mA STATUS OUTPUT***DID NOT CONNECT YET??? DOES THIS GO TO BROWN OF THE XK06???

DOOR LOCK 3 PIN CONNECTOR:

1 BLUE *** NOT SURE WHERE TO GO??? (+ OR - SYSTEM??)

2 EMPTY

3 GREEN  *** NOT SURE WHERE TO GO??? (+ OR - SYSTEM??)

NOW FOR THE XRESSKIT MODEL: XK06-PKG7

1 BROWN D2D INPUT(-) ***DOES THIS GO TO BLUE OF OUTPUT ON RS OUTPUT??

9 RED ***CONNECTED TO CONSTANT 12V

10 BLACK ***CONNECTED TO GROUND.

***ALL OTHER CONNECTIONS ON THIS DIAGRAM ARE LABLED W2W, SO I AM ASSUMING I DON'T NEED TO WIRE THESE SINCE I AM USING D2D

This viper kit came with a relay and resistors, but I don't think I have to use this with the XK06 connected. If anyone has any info for me please let me know. you can reach me at rickyk@nep.net with any other info you don't want to post on here.

Thanks,

Rick

 

 

tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 28, 2009 at 9:11 AM / IP Logged  
dont use d2d, hook everything w2w method. solder and heat shrink it. it will be more reliable.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
metz35 
Copper - Posts: 458
Copper spacespace
Joined: January 13, 2003
Location: Pennsylvania, United States
Posted: December 28, 2009 at 9:20 AM / IP Logged  
first thing is first.... this bypass doesnt even work on your vechicle
NOW FOR THE XRESSKIT MODEL: XK06-PKG7
1 BROWN D2D INPUT(-) ***DOES THIS GO TO BLUE OF OUTPUT ON RS OUTPUT??
9 RED ***CONNECTED TO CONSTANT 12V
10 BLACK ***CONNECTED TO GROUND.
***ALL OTHER CONNECTIONS ON THIS DIAGRAM ARE LABLED W2W, SO I AM ASSUMING I DON'T NEED TO WIRE THESE SINCE I AM USING D2D
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: December 28, 2009 at 9:40 AM / IP Logged  
you do know that PKG7 is not the correct firmware for this vehicle... right??
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
rickyk00 
Member - Posts: 3
Member spacespace
Joined: December 28, 2009
Location: Pennsylvania, United States
Posted: December 28, 2009 at 9:50 AM / IP Logged  
Yes I see it is not the correct one for my vehical. It looks like I will need the PLXR V3.00 I will have to get this fixed first... and Yes I am soldering all connections.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: December 28, 2009 at 11:59 AM / IP Logged  
also, ACC and 2nd IGN will need to be connected..... 
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
rickyk00 
Member - Posts: 3
Member spacespace
Joined: December 28, 2009
Location: Pennsylvania, United States
Posted: December 30, 2009 at 3:56 PM / IP Logged  

OK I ordered the XK-01. According to Directed this will work out of the box.

I have setup a spread sheet with connections. Would someone be able to tell me if this is correct and maybe help me out with what I have wrong. Thanks

****The Left 2 columns are pin and wire colors and the next two are where they would be connected to. Please exclude the "My Comments/Questions" Column for this.

Pin

XK-01

Viper 5101

2005 Gmc Envoy

My Comments/Questions

1

Brown

Relay Output Blue

N/A

2

Green

H2 Light GREEN / WHITE

N/A

3

Blue

H2 Light GREEN/ Black

N/A

4

Violet/White

H1 Violet

N/A

5

Violet

N/A

OBDII Pin 2

6

Pink/White

N/A

N/A

7

Pink

N/A

Dome Light, but not sure where to connect???

Do I connect this and H1 Green to the Dome Light???

8

Orange

N/A

N/A

9

Red

N/A

12V Constant

10

Black

N/A

Ground

Pin

Viper 5101 H1

2005 Gmc Envoy

XK-01

1

RED / White

N/A

N/A

2

Red

12V Constant

N/A

3

Brown

BLACK / YELLOW (Steering Column Harness)

N/A

4

WHITE/ Brown

N/A

N/A

5

Black

Ground

N/A

6

Violet

N/A

Violet/White

7

Blue

N/A

N/A

8

Green

Dome Light, but not sure where to connect???

N/A

Do I connect this and XK-01 Pink to the Dome Light???

9

BLACK/ White

N/A

N/A

10

WHITE/ Blue

N/A

N/A

11

White

N/A

N/A

12

Orange

N/A

N/A

Pin

Viper 5101 H2

2005 Gmc Envoy

XK-01

1

Light GREEN/ Black

N/A

Blue

2

Light GREEN / WHITE

N/A

Green

3

WHITE/ Violet

N/A

N/A

4

Violet/Black

N/A

N/A

5

WHITE/ Black

N/A

N/A

6

Light Blue

N/A

N/A

7

Gray/Black

N/A

N/A

Pin

Viper 5101 H3

2005 Gmc Envoy

XK-01

1

Pink

Pink (Steering Column Harness)

N/A

2

RED / White

12V Constant

N/A

Or does this get wired to the RED / WHITE (Steering Column Harness)???

3

Orange

ORANGE / Brown (Steering Column Harness)

N/A

4

Violet

Yellow (Steering Column Harness)

N/A

5

Red

12V Constant

N/A

6

Pink/White

White (Steering Column Harness)

N/A

7

Pink/Black

N/A

N/A

8

RED / Black

12V Constant

N/A

Pin

Viper 5101 RS Input

2005 Gmc Envoy

XK-01

1

BLACK/ White

Ground

N/A

2

Violet/White

WHITE (BLUE PLUG FOR ECM)

N/A

3

Brown

WHITE (SWITCH Above Brake Pedal)

N/A

4

Gray

To Hood Switch

N/A

5

Blue/White

N/A

N/A

Pin

Viper 5101 RS AUX Output

2005 Gmc Envoy

XK-01

1

Pink/White

N/A

N/A

2

Orange

N/A

N/A

3

Violet

N/A

N/A

4

Pink

N/A

N/A

5

Blue

N/A

Brown

Pin

Viper 5101 Door Locks

2005 Gmc Envoy

XK-01

1

Blue

N/A

N/A

2

Green

N/A

N/A

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: December 30, 2009 at 4:34 PM / IP Logged  

assuming you are using the D2D cable the XK01 will do bypass and doorlocks with only one wire needing to be connected (plus the D2D cable)  Violet from the module goes to violet at the OBD connector.... programm the module for the correct platform and off you go... quick and easy....

you still need to hook up the R/S wires (brake, parklights, IGN wires, etc etc)

Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 10, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer