Power door locks

Home / the12volt's Install Bay / Car Security and Convenience / Power door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

schnapes01

Member - Posts: 3

Joined: January 16, 2003

Location: United States

Posted: April 17, 2003 at 7:06 AM / IP Logged

I have a 2001 Tacoma 2dr and would like to install central power door locks.Does anyone have any suggestions or recommendations.

Thanks,

Randall

drvnbysound

Silver - Posts: 289

Joined: May 06, 2002

Location: United States

Posted: April 17, 2003 at 11:45 AM / IP Logged

I have installed power locks for use with alarms twice on the 97 model Tacoma, and I will personally tell you, that if your door locks are on the top lip of the door near the window, and you have not worked with door actuartors much, that you will be in for a nice treat. The first time that I did it it was quite a task. You will need to remove quite a few things, such as the plastic tubing that Toyota put around the door lock pole. Installing power door locks in cars where the actual door lock button is on the side of the door is much easier. It can be done, but its going to take quite a bit of work.

Good luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Power door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.