avital 4103 on 2000 cherokee

Home / the12volt's Install Bay / Car Security and Convenience / avital 4103 on 2000 cherokee (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

klm10

Member - Posts: 2

Joined: January 06, 2010

Location: Tennessee, United States

Posted: October 24, 2010 at 3:45 PM / IP Logged

First timer on remote starts so bare with me. I can get doors to lock and unlock. When i try to remote start nothing happens. Heavy gauge wire red to red, pink to blue, purple to yellow, pink/white to BLACK/ orange. I checked neutral saftey wire its good and brake. The 4 pin satellite harness purple can go to ground and the car tries to start. I read on here you usually dont need 4 pin harness. Hope thats enough info to get started.

klm10

Member - Posts: 2

Joined: January 06, 2010

Location: Tennessee, United States

Posted: October 24, 2010 at 5:24 PM / IP Logged

When the install directions say (+) output to starter circuit should that wire ring out to ground. or have 12 volts on it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avital 4103 on 2000 cherokee

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.