viper 5701, 2003 cadillac cts

Does anyone know if I have to use the H2 connector and the remote start relay output with a relay or are they just not used at all? And if they are used, where do they get wired in that particular car? Please Advise. Thanks, D28Master"Procrastinators and Waiters will be Haters Sooner or Later"

You didnt list what bypass you are using for that outfit so if the 1 you have chosen doesn't do disarm then you would need to run that wire into the door.  Also, if you wanted the horn honk output(i know the 5701 has a siren) then you need that wire from the harness as well.  Those wires are on the h2 harness.  The relay harness with the small - trigger wires isn't needed. Advanced

Thanks, but I got it, installed it and it works fine now, I installed the DLPKGM bypass, but the problem now is that when I remote start, it says service security system. Any takers on this one?"Procrastinators and Waiters will be Haters Sooner or Later"

you could try putting a diode inline with the gwr cathode side toward the R/s.  You could also try isolating it with a relay. Advanced

I think it's a brown wire that I have to hook up to get it to work, not sure about all these wiring diagrams that keep saying keysense wire is lt. green. not sure what wire to hook up to the keysense wire. Will work on it this coming weekend."Procrastinators and Waiters will be Haters Sooner or Later"