the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dei 529t resistance change


Post ReplyPost New Topic
< Prev Topic Next Topic >
chrizzerz 
Member - Posts: 4
Member spacespace
Joined: January 16, 2008
Posted: February 11, 2011 at 10:30 PM / IP Logged  
Hi everyone, I have a 529t installed on my truck and ccasionally the windows don't roll up all the way.  I know the 530t has dipswitches to change the resistance it stops at, buy my 529t doesn't.  I've heard that you can open the unit up, and solder in a resistor of your own to change the setting though.  Is this possible, and if so how is it done?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 12, 2011 at 2:41 AM / IP Logged  
Probably a lot easier to check that the window mech moves freely and occasionally spay the channels with WD 40.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer