remote start problem, 97 honda crv

HI All! Have a problem and see if you can help. I have a 97 honda crv auto. it has a viper 300+ alarm and i'm adding a auto starter from auto command m#25622. i took out the starter kill relay. i went and connected all wires needed to start the car. when i remote start it the ignition wire have no power. (test light on blk/yel) (it cranks) remote works with auto starting it only remote start when i leave the key in "on" position. (ignition have power) there only 5 wire from the key ignition blk/yel, blk/white, WHITE/ blk, wht, & yellow. am i missing some thing here? why is there no power when the auto start kicks. any help would be great! the wire i connected on the auto command: brake pedal tach dist constant starter ignition (problem) ignit output to viper ignit input) RED / wht wire to viper aux output. LInk to auto command 25622: http://www.readyremote.com/pdf/manuals/25622.pdf link to viper 300x alarm: http://www.directeddealers.com/manuals/ig/viper/N432V.pdf

did you power up red, RED / white, RED / black?Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

The only wire connected from the viper to auto command is the wht/blu wire (viper)  to RED / wht wire (auto command).  I put a test light on the auto command unit. When auto start is push There light on constant 12v Light on starter when cranking But no light on ignition wire blue?? Did I miss some wires?

Is there a by-pass missed here as well?

Oh sorry about that, I saw it as an 07. Effing senile dementia. Actually Ted, 2 x pink and one red.

Still wrong, 2 x pink! N.B. Assuming this is an auto box, there's seemingly no NSS provision.

What constant wires did you connect from the remote start unit? It sounds like you don't have the 12v input for the ignition relay connected to a good 12v source which would explain why you have no voltage on your ignition wire. Edit: Oh sorry, I see now that is what Howie meant by 2x pink... haha. Yea, what they said, both Pink wires need to be connected to a 12v constant source (White wire in vehicle). Also make sure you are activating the ignition wire (BLACK / YELLOW) and both accessory wires (Yellow & WHITE/ Black).Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

offroadzj wrote: What constant wires did you connect from the remote start unit? It sounds like you don't have the 12v input for the ignition relay connected to a good 12v source which would explain why you have no voltage on your ignition wire. Edit: Oh sorry, I see now that is what Howie meant by 2x pink... haha. Yea, what they said, both Pink wires need to be connected to a 12v constant source (White wire in vehicle). Also make sure you are activating the ignition wire (BLACK / YELLOW) and both accessory wires (Yellow & WHITE/ Black).

I see... i will try that when i get home tonite.. thanks for the advise.. mak.