python 460max starter kill

Howdy, I have installed the above alarm in my 1970 Bronco. It comes with a starter kill relay pre-wired with the alarm and uses a 610T 5 pin relay. I have wired it exactly as the install manual shows and the alarm works fine other than starter kill. I am able to start the vehicle with the alarm armed. I split the starter wire that runs from the kit switch to the starter solenoid and wired the relay. If I pull the relay, I cannot start the vehicle, so I'm fairly sure I have the right wire. It's the RED / blue here: http://seabiscuit68.tripod.com/images/68-71ignition-color.gif I tried another relay, same problem. Any help would be appreciated. Thanks.

That should be "ignition switch" not "kit switch".

85 - ground when armed from viper 86 - ignition 1 87a - starter wire key side 30 - starter wire car sideTed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert