the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

k 9 eclipse door lock wires


Post ReplyPost New Topic
< Prev Topic Next Topic >
vinsanity0429 
Member - Posts: 15
Member spacespace
Joined: March 11, 2012
Location: Florida, United States
Posted: April 06, 2012 at 9:08 PM / IP Logged  
I am installing a K9 Eclipse alarm into a 2002 Chevy Avalanche and am confused about the door locks.
The alarm comes with a 6 pin connector designated for the door locks and the manual reads:
Violet: Unlock relay input Pin #87 (N/O)
Blue: Unlock Relay Output pin #30 (Common)
Brown: Unlock Relay Input Pin #87A (N/C)
Violet/Blk: (Lock Relay Input Pin #87 (N/O)
GREEN/ Blk: (Lock Relay Output pin #30 (Common)
WHITE/ Blk: (Lock Relay Input Pin # 87A (N/C)
My question is do I really need to make a relay for the door locks or can I just hook up 1 wire to Lock and 1 wire to Unlock? And if 1 wire only is needed which one do I connect? The outputs?
There was already an aftermarket alarm installed but it was old and didn't come with the remotes... hence why it needs a new one... And it only had 2 door lock outputs that went one to the Lock and one to Unlock.
The lock wires on the vehicle are positive.
If anyone could help it would be much appreciated.
-Thank you-
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 06, 2012 at 9:34 PM / IP Logged  
The locks on the 2002 Avalanche are Type A (+).  The internal relays are prefect for that
application.  Connect both Violet and Violet/Black to +12v through a 15A fuse.  Connect the
GREEN/ Black lock wire to  the LT. BLUE wire  @ BCM, BROWN PLUG, PIN A4.  Connect the Blue
unlock wire to the WHITE @ BCM, BROWN PLUG, PIN A3.  The Brown and WHITE/ Black are not used
and should be insulated.
Soldering is fun!
vinsanity0429 
Member - Posts: 15
Member spacespace
Joined: March 11, 2012
Location: Florida, United States
Posted: April 07, 2012 at 2:16 PM / IP Logged  
Awesome... Thank you so much for your help.
Alarm is in and works like a champ!
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 07, 2012 at 2:50 PM / IP Logged  
Good job!  k 9 eclipse door lock wires -- posted image.
Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer