turn signal lights wiring

Home / the12volt's Install Bay / Car Security and Convenience / turn signal lights wiring (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

il200

Member - Posts: 7

Joined: July 10, 2013

Posted: July 10, 2013 at 12:57 PM / IP Logged

Hello Folks

I installed Universal Car Keyless Entry (Suzuki Esteem/Baleno 99')

And I need to connect one wire (brown +) to 4 signal, Anyone know which wire is supposed connect to?

turn signal lights wiring -- posted image.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 10, 2013 at 1:09 PM / IP Logged

Steering column loom, 2 wires one will flash on left indicator, other on right split that brown wire via 2 x 1N5404 diodes, bands towards wires.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 10, 2013 at 1:13 PM / IP Logged

GREEN/ red and GREEN/ YELLOW?

il200

Member - Posts: 7

Joined: July 10, 2013

Posted: July 10, 2013 at 1:15 PM / IP Logged

howie ll wrote:

GREEN/ red and GREEN/ YELLOW?

Yellow / Green Left

White / Green Right

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 10, 2013 at 1:17 PM / IP Logged

I'm guessing so TEST

il200

Member - Posts: 7

Joined: July 10, 2013

Posted: July 10, 2013 at 1:17 PM / IP Logged

howie ll Thanks for the response

This is the only way only with diodes?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 10, 2013 at 1:18 PM / IP Logged

If only one wire, then yes, note, also at the hazard switch.

il200

Member - Posts: 7

Joined: July 10, 2013

Posted: July 10, 2013 at 1:31 PM / IP Logged

Indeed thanks

il200

Member - Posts: 7

Joined: July 10, 2013

Posted: July 10, 2013 at 1:46 PM / IP Logged

Possible to put only one diode in one wire (after the split)?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 10, 2013 at 1:53 PM / IP Logged

Not thinking this through are we.....

If you diode the left only, when you drive and indicate right BOTH SIDESwill work, put it on the right only, indicate left, again etc.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.