1994 chevy 1500 autostart as1780

Home / the12volt's Install Bay / Car Security and Convenience / 1994 chevy 1500 autostart as1780 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

belialsson

Member - Posts: 4

Joined: November 29, 2013

Location: Alberta, Canada

Posted: November 29, 2013 at 1:15 PM / IP Logged

I am installing an autostart as-1780 and connected all my wires to the correct places and getting no response from the remote.

belialsson

Member - Posts: 4

Joined: November 29, 2013

Location: Alberta, Canada

Posted: November 29, 2013 at 1:56 PM / IP Logged

this is what wires i have where and if i could get some input it would be great.

Constant- Red

Starter- Purple

Ignition- Pink

Acc- Orange

Tach- White off of igntion coil

Brake Switch- Orange

Parking lights- Brown +

Door Lock- light blue

Door Unlock- BLACK/ white

Door trigger +- Blue/white

Door trigger - - Black

hood switch is connected

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: November 29, 2013 at 2:09 PM / IP Logged

Do you have the correct orange brake wire connected? Is the truck Automatic? If so is the yellow loop cut? And does the unit flash the parking lights 4 times when powered up?

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

belialsson

Member - Posts: 4

Joined: November 29, 2013

Location: Alberta, Canada

Posted: November 29, 2013 at 2:13 PM / IP Logged

everthing i have read says there is a white brake wire wire but i dont have a white wire so i tested to see and the orange was the ticket. i am not getting any flashes when the unit is powered up. i have cut the loop due to the truck being an auto.

belialsson

Member - Posts: 4

Joined: November 29, 2013

Location: Alberta, Canada

Posted: November 29, 2013 at 2:48 PM / IP Logged

So I am now getting the flashes when the unit is powerd up. But still no response from the remote at all. I have checked all of my connections and all seem to be correct and I have a good ground.

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: November 29, 2013 at 2:56 PM / IP Logged

What are your wiring connections on the 5 pin connector?

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1994 chevy 1500 autostart as1780

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.