the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

door locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
m_berrow 
Member - Posts: 22
Member spacespace
Joined: April 20, 2003
Location: United States
Posted: May 20, 2003 at 6:53 AM / IP Logged  
I have an 02 nissan xterra and Im trying to figure out the door locks. I think I found the wires but i get no lock or unlock with a prestige alarm. I am using the yellow and yellow/red wires. Can somebody help? Thanks
cpgoose 
Gold - Posts: 1,098
Gold spacespace
Joined: July 08, 2002
Location: United States
Posted: May 20, 2003 at 7:20 AM / IP Logged  
This is the wiring diagram I found for your car...although it says 2000 to 2002. You might want to wait until someone verifies these wires.
Nissan Xterra 2000-2002
Alarm and Keyless Entry Wiring Colors and Notes
Constant +12 Volts:   GREEN   IGNITION SWITCH HARNESS
Starter Kill:   BLACK / YELLOW & GRN/YEL IGNITION SWITCH HARNESS
Ignition +12 Volts:   BLACK/ WHITE IGNITION SWITICH HARNESS
Dome Lights/Superv:   RED / BLACK (-) AT SECURITY MOD. PIN # 9 OF 36 PIN CONNECTOR
OEM Horn:   LT. GREEN/ RED (-) STEERING COLUMN HARNESS
Power Lock:   LT. GREEN/ RED (-) AT SECURITY MOD. PIN # 18 OF 36 PIN CONN
Power Unlock:   BROWN (-) AT SECURITY MOD. PIN # 18 OF 36 PIN CONN
Trunk Release:   N/A
Alarm Input Wire:   RED / BLACK (-) AT SECURITY MOD. PIN # 9 OF 36 PIN CONNECTOR
Notes:
* Security Module Can Be Found High In Driver's Kick Panel.
m_berrow 
Member - Posts: 22
Member spacespace
Joined: April 20, 2003
Location: United States
Posted: May 20, 2003 at 8:27 PM / IP Logged  
thank you very much! I looked up on Omega and got those colored wires but wasnt sure if it was right. Then i looked on directechs and got the yellow wires.
m_berrow 
Member - Posts: 22
Member spacespace
Joined: April 20, 2003
Location: United States
Posted: May 20, 2003 at 8:29 PM / IP Logged  
thanks bud
cpgoose 
Gold - Posts: 1,098
Gold spacespace
Joined: July 08, 2002
Location: United States
Posted: May 21, 2003 at 8:25 AM / IP Logged  
No problem...so you got it to work?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer