the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

new member avital 4113lx


Post ReplyPost New Topic
< Prev Topic Next Topic >
lincolnshibuya 
Member - Posts: 3
Member spacespace
Joined: November 13, 2014
Location: Missouri, United States
Posted: November 14, 2014 at 12:43 PM / IP Logged  
A newbie here, I hope someone could help or enlighten me.
I'm planning on installing Avital 4113LX remote starter and PKFM as my bypass module for my 2002 mercury mountaineer v8. It has factory alarm installed with keyless entry.
I chose that model because I just want to use my factory fob for keyless entry and also use the existing factory alarm. So I got a few questions;
1. Will the Avital 4113LX work just for remote starting only? I don't want it to unlock my doors since I will be using my existing remote. If I left it not connected will it be fine (door unlock) ?
2. Will my factory alarm not go off if I remotely start the car, unlock using my remote and go inside? In this scenario I have wired the factory disarm.
3. Do I need a relay to connect to the factory disarm wire? It seems that the remote starter factory disarm signal is already "-".
If I have time this weekend I'll setup the wiring diagram and have you guys checked it out, thanks in advance..
pentavolvo 
Copper - Posts: 241
Copper spacespace
Joined: September 30, 2003
Location: United States
Posted: November 14, 2014 at 1:25 PM / IP Logged  
Don't hook up unlock wire and you shouldn't have to worry about disarm either for just a remote start
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: November 14, 2014 at 1:46 PM / IP Logged  
Before starting this endeavor ensure the key fob works for both lock and unlock while the vehicle is running - many cars ignore the key fobs once the vehicle is running.
lincolnshibuya 
Member - Posts: 3
Member spacespace
Joined: November 13, 2014
Location: Missouri, United States
Posted: November 14, 2014 at 2:13 PM / IP Logged  
pentavolvo wrote:
Don't hook up unlock wire and you shouldn't have to worry about disarm either for just a remote start
so I'll leave the factory alarm disarm unconnected.
lincolnshibuya 
Member - Posts: 3
Member spacespace
Joined: November 13, 2014
Location: Missouri, United States
Posted: November 14, 2014 at 2:15 PM / IP Logged  
good point, there are cases where the remote key doesn't work anymore when the engine is running.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer