the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

added 2 wire door actuator with 2 relays


Post ReplyPost New Topic
< Prev Topic Next Topic >
datechnician915 
Member - Posts: 2
Member spacespace
Joined: January 19, 2015
Location: Texas, United States
Posted: January 19, 2015 at 10:58 AM / IP Logged  
I have a 1999 c2500 I added a autopage alarm and 2 2 wire door actuators. I used 2 relays. The setup only has enough power to open one side. If I disconnect a actuato then the either side will work depending on which on I disconnect. I tried a new ground I tried running a thicker 12v source and I still have problems. Should I wire 4 relays or what is recommended for setup. From alarm I have 1 blue 1 green wire
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 19, 2015 at 12:44 PM / IP Logged  
Not so much the wire size as actuator positioning.
16 ga. wire should be more than adequate with a 15 amp fuse.
Make sure the actuators pull the rods freely with no friction or snagging.
datechnician915 
Member - Posts: 2
Member spacespace
Joined: January 19, 2015
Location: Texas, United States
Posted: January 19, 2015 at 8:46 PM / IP Logged  
The actuators pull nice. I have to test them one at a time. Just when I have both connected they dont pop all the way to open and lock door
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: January 19, 2015 at 9:06 PM / IP Logged  
You probably just need to adjust the connection to the rod in the door. Measure the travel distance the original rod moves and make sure the actuator moves the same. When the rod in the door is at it's travel limit, make sure the actuator is as well. Make sure all your connections are good as well.
sparky

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer