5906v in 1992 Honda Accord

I do know the basics and some more information on the 92 accord wiring. I installed my 5901 a couple years back in my other 92 accord. It went well. I am trying to install a 5906v in my other 92 Accord but since DEI only has the quick reference install guide I am a bit lost. On the Remote Start 10 pin heavy gauge connector Pin        Color      Connection Accord wiring 1  NC    No connection 2    RED / black   + Fused 12v Accessory/starter input yellow wire @ignition 3    Pink/black + Flex relay input 87a key side    ??? 4    Pink/white + Ignition 2 flex relay ouput      ??? 5    Red        + Fused 12v Ignition 1 input      BLACK / YELLOW @ignition 6    Green       + Starter input (key side)        BLACK/ white   (cut) @ignition 7    Violet      + Starter ouput (car side)        BLACK/ white @ (cut) interior fuse panel 8    Orange      + Accessory output  ??? 9    RED / white   + Fused 12v Ignition 2 flex relay   ??? 10   Pink        + Ignition 1 input/output       ??? My Accord is simple I know. However these extra wires and Flex relay talk has got me stumped. I did search around before asking and most of it was for newer cars that come with factory alarms and more options then my old car. Thank You!

1 2, RED / black to white at ignition switch. 3, Not used. 4, Not used. 5, Red, as RED / black at 2. 6 and 7 correct. 8 Orange to yellow at ignition switch. 9, RED / white to red and RED / black as 2. 10, Pink to BLACK / YELLOW at ignition switch. Now isn't that simple. All you need to do is to follow the reference guide and a rest light, you won't even need a meter with this car.