Dome light problem

Help! '03 Dodge Ram Pick-up. While installing a clifford Level 4 keyless w/ alarm I accidently sent 12 volts thru the brown wire at the dome light. It is a negative trigger and I had my output set wrong. The dome lights do not come on now unless you push the map light button on the light itself. I checked all fuses and they are fine. I checked the bulbs and they are fine. I swapped hedlight/dimmer/domelight override switch with another truck and it worked fine in the other truck. When I check the brown wire at the dome light now it stays at 12 volts, except when I push the map light switch. It will not go to ground any other way. Thanks in advance for the help.

did the light have a delay on it after you shut the door??? if so find the control box and check it out Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

i checked on the truck at the station.....dumb ????here.... did you check the dimmer switch??? could you have bumped it??? the only fuses that i could find were #18 and #23 under the hood. let me know what you find out..Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt