Toyota Hiace 2016

Home / the12volt's Install Bay / Car Security and Convenience / Toyota Hiace 2016

Welcome Guest :)

Members

< Prev Topic Next Topic >

bignoise

Member - Posts: 1

Joined: July 26, 2016

Location: New Zealand

Posted: July 26, 2016 at 3:32 AM / IP Logged

Hi people, I am trying to install a car alarm into a 2016 Hiace, I have managed to connect almost all of the wiring however I am having trouble locating the negative door trigger for the front of the vehicle at the panel behind the glovebox.

I am also having an issue with the negative inhibitor for the mapping function. Any help with this issue would be greatly accepted.

Cheers

Brett

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2016 at 1:42 PM / IP Logged

Pick up the door trigger at the dome light, it covers all doors.

Otherwise it will be a plug on the fusebox/body control consisting of two or three wires.

wth is a negative inhibitor for mapping function?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.