Avital 4103, doors unlock no remote start

I have installed an Avital 4103 connected by D2D using a DBALL2 bypass on my 2014 Toyota Corolla H Key. I have flashed the DBALL2 properly.   I am assuming my canbus connections are good I am able to lock and unlock my door with the remote. I am not getting any response with the remote starter portion. I have the the 2 heavy gauge red cables going to 12 volt constant from the battery, the pink is going to ignition 1 on the car harness, pink/white to ignition 2, and purple to the starter. The odd thing is that the cables from the remote starter are heavy gauge and on the ignition harness they are very small). I am getting voltage to the remote start module. I dont know if I am missing a step. First foray with remote starts, thanks for any advise

Nevermind, didnt see the safety switch I had to wire up. Works like a charm. derrr