EVO-ALL Won’t Program, 2009 Ford Fusion

Home / the12volt's Install Bay / Car Security and Convenience / EVO-ALL Won’t Program, 2009 Ford Fusion

Welcome Guest :)

Members

< Prev Topic Next Topic >

97gss

Copper - Posts: 235

Joined: February 12, 2004

Location: United States

Posted: February 14, 2019 at 1:11 PM / IP Logged

Using an evo-all and can't get it to program passed step 13(program 6). Red and yellow supposed to flash for step 14, but the yellow light stays solid. Key is factory with keyless buttons built in. But I don't see any markings on key indicating 40-bit. This is the only key for the car. Other key was lost.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.