1999 Benz ML 320 Lock/Unlock Wire

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Benz ML 320 Lock/Unlock Wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Trav3D1

Copper - Posts: 146

Joined: April 06, 2003

Location: United States

Posted: July 07, 2003 at 9:41 AM / IP Logged

I recently installed a Viper 790 on a 1999 Benz ML 320. The vehicle has a negative pulse single wire lock and unlock system. The lock functionality is working just fine, but I was not able to figure out how to send the double negative pulse to unlock the doors.

I figure that I may need a relay, resistors, or diodes, but need some further clarification and explanation of what additional steps I need to follow.

Please advise......Thanks

Trav

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: July 07, 2003 at 12:11 PM / IP Logged

there is another setting on menu 2 programming that uses double pulse

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Benz ML 320 Lock/Unlock Wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.