need sirious help

Home / the12volt's Install Bay / Car Security and Convenience / need sirious help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

luisf_1

Member - Posts: 1

Joined: October 01, 2003

Location: United States

Posted: October 03, 2003 at 5:00 PM / IP Logged

i have purchased a remote start alarm from some one on the12volt and the alarm works perfectly but but the car does not start does anyone have any idea as to what might be my problem

the car is a 5 speed and all wires are correct also the clutch is bypasses and it gives me a code of ( IGNITION ON) i dont understand what it means

i would very much appreciate it ..

LuisF@yahoo.com

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 03, 2003 at 7:18 PM / IP Logged

Need some information from you. Year, make & model of car and also the system that was purchased.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: October 17, 2003 at 8:25 AM / IP Logged

Some units require you to learn a tach signal before it will attempt to remote start, and some require you to enter programming. Make sure your key is not in the ignition and turned to on when attempting to remote start. The code "ignition on" gave me that idea. is the unit designed for manual transmission vehicles? If it is, then you need to enter what is commonly referred to as "ready mode" before it will start. Like jeff said, give us the make and model of both your car and you RS and we can help better.

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need sirious help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.