Clifford ''Sound'' from any alarm

Home / the12volt's Install Bay / Car Security and Convenience / Clifford ''Sound'' from any alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

UFZach

Member - Posts: 1

Joined: October 18, 2003

Location: Afghanistan

Posted: October 18, 2003 at 1:22 PM / IP Logged

Hey Y'all...

Just had a Compustar 2WSS installed on my wrangler along with aproximity sensor and am really pleased with the way its working...however, I think the "sound" cominng out of the siren is really lacking..both in loundness as well as agressiveness...what I mean by this is the alarm has that generic sound where is plays like those 8 differfent alarm noises in sequence for about 4 seconds each (I know y'all know what I'm talking about..)On the other hand, those clifford alarms have a realy agressive noise when the siren goes off as well as a really mean and loud wanring chirp that really makes you step away if you get close to the car...

I want to be able to get this "sound" as well as "loudness" out of my alarm as was wondering if it is the doing of the brain or the actual siren that comes with clifford alarms...in other words, can I simply splice the wires coming out of my brain going to the siren and hook up a clifford siren in stead (as I'm it won't simply pluug into the compustar harness)..Isn't it simply a pos/neg wiring setup going to the siren that could, in threory, be hooked up to any brain???

Thanks in advance for the help...

-Zach

padawan

Copper - Posts: 215

Joined: June 11, 2002

Location: United States

Posted: October 18, 2003 at 1:38 PM / IP Logged

As Long as it's a 12 Volt siren it will work, just connect the Clifford siren to your alarm's (+) siren output and ground the other wire on the clifford siren...

However, the pulses (chirps) that the siren does is controlled by the brain...

Also, if your siren isn't as loud as u want it to be, make sure there's nothing obstructing the bell, try to make it "shoot" the sound into on open space...

promodeepcycle

Copper - Posts: 152

Joined: October 17, 2003

Location: United States

Posted: October 18, 2003 at 9:38 PM / IP Logged

some clifford sirens are speakers and are alot different than your typical "siren" .... maybe think about adding a second siren and using a relay ... i have 6 sirens ..mostly clifford using relays and it sounds like a sonic boom ... kinda kool .. i can always find my truck lol

dont be a pet monkey ..use your dmm

Search for other posts by promodeepcycle

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford ''Sound'' from any alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.