791xv Install Help

Home / the12volt's Install Bay / Car Security and Convenience / 791xv Install Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kylethemaster

Member - Posts: 2

Joined: February 08, 2004

Location: Canada

Posted: February 09, 2004 at 12:02 AM / IP Logged

Hey all, I am MECP certified, but I haven't done many installs at all.

My LED on my 791xv seems to not want to turn off after the alarms been tripped. it's supposed to just flash a number of times representing the zone that went off, and shut off when the ignition is turned on.. but mine doesn't! it just stays on... does someone have a suggestion as to what could be wrong?

Also I read that the satellite relay pack was supposed to have a built in starter kill... my anti/grind works, my starter kill doesn't. I had to add a relay in before the green wire in order to get this feature to actually work... comment?

Thanks for any help anyone can give me!

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 09, 2004 at 12:49 AM / IP Logged

I've had the same problems with the starter kill problem. Maybe your LED is not plugged in the port all the way. If the LED is solid then that may be the case...Also check your valet port...and try programming something to see if the LED corresponds with the programming.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: February 16, 2004 at 1:49 PM / IP Logged

the starter killfeature is turned on and off with the programming features...use your bitwriter and program Security Feature On and then it will work... the LED should reset when you disarm the unit and then cycle the ignition

kylethemaster

Member - Posts: 2

Joined: February 08, 2004

Location: Canada

Posted: February 16, 2004 at 8:54 PM / IP Logged

hmm... I'll have to look into the programming feature.

Even though I alread added a starter kill relay... hmm... two starter kills?

that could work

and as for my LED not turning off... I'm an idiot and I hope no one kicks me in the teeth for it, but this is what happens when you hook up your secondary ignition instead of your primary.... that was a nice kick in the rear for me to thouroughly read the owners manual... hahaha

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: February 16, 2004 at 9:58 PM / IP Logged

POW right in the teeth!

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv Install Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.