Alarm install -01'GMC 1500HD ?

Home / the12volt's Install Bay / Car Security and Convenience / Alarm install -01'GMC 1500HD ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

justice29

Member - Posts: 7

Joined: February 09, 2004

Location: United States

Posted: February 09, 2004 at 12:19 PM / IP Logged

I am in the process of purchasing an Autopage 850 alarm/remote start for my 2001 GMC Sierra 1500HD pickup that came with the factory keyless entry/security system. Are there any special circumstances that I should be aware of? I have read about some Ford vehicles triggering the alarm after a certain amount of time because of a power shutdown.

Is there anything like that relating to the GMC P/U's?

Any help is greatly appreciated.

John

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2004 at 1:27 PM / IP Logged

The only thing you have to do with this truck for the door triggers is to diode isolate them from each other and also you will need a bypas module for the remote start for the truck to bypass the Passlock II system it has. Use the PLDATA for easiest bypass module available.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

soultinter

Copper - Posts: 170

Joined: January 16, 2004

Location: United States

Posted: February 09, 2004 at 3:51 PM / IP Logged

you may encounter the RAP system that keeps your radio on after shutdown.

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: February 09, 2004 at 5:33 PM / IP Logged

The factory alarm can be re-armed by pulsing the door lock wire ( + light blue at BCM under steering column) and the driver's doorpin wire ( - tan at the BCM) at the same time. This will also shut off the radio's reatained power circuit.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm install -01'GMC 1500HD ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.