'99 4 Runner Factory Alarm

Home / the12volt's Install Bay / Car Security and Convenience / '99 4 Runner Factory Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mattlh81

Member - Posts: 1

Joined: February 07, 2004

Location: United States

Posted: February 23, 2004 at 1:55 PM / IP Logged

Does anyone have the schematic for the factory alarm system on a 99' 4-Runner?

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: February 23, 2004 at 2:56 PM / IP Logged

the alarm is built into the body ECU. The interfacing lock and unlock wires are RED / white and red in an 18 pin connector in the drivers kick panel, remember that it's a toyota childlock system, the childlock wire is RED / blue(-) in the driver kick panel. The actual door lock motor wires are blue/white (lock) in the driver kick panel, BLACK / YELLOW (unlock) in the passenger kick panel, and the drivers door unlock alone is a pink/green wire in the drivers kick panel. This is a reversal rest at ground system.

any questions, give me a PM

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'99 4 Runner Factory Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.