trunk release 97 sebring convertible

Home / the12volt's Install Bay / Car Security and Convenience / trunk release 97 sebring convertible (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

petesneeze

Member - Posts: 14

Joined: April 02, 2004

Location: United States

Posted: April 08, 2004 at 8:38 PM / IP Logged

Trying to get the trunk release to work with phoenix pd175. Unit has a wire that says trunk relase positive output. looks like i need a relay, but instructions are NOT good!!

The trunk release switch inside the console has 2 wires on it, BROWN / blue is 12v

gray reads 6v

How do I make it work??????????

Thanks, a rookie who is learning!

pete

desh187

Copper - Posts: 310

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 13, 2002

Location: Canada

Posted: April 08, 2004 at 9:52 PM / IP Logged

if your alarm has positive output,then just hook that wire to light GREEN/ black(+) at trunk release switch.

jimustanguitar

Member - Posts: 16

Joined: December 26, 2003

Location: United States

Posted: April 09, 2004 at 3:45 AM / IP Logged

usually, what i do is just use a relay in parallel with the switch, so that when your alarm triggers that wire, the relay closes the circuit the same way that pushing the button would have. i hate trying to figure out whether the switch is on the pos or neg side of the motor and whether there is a relay or not inline after that, so i usually just add a relay in parallel with anything that has a switch like this that i don't feel like figuring out, i save a lot of problem solving time, and relays are cheap enough that i don't really mind.

Search for other posts by jimustanguitar

petesneeze

Member - Posts: 14

Joined: April 02, 2004

Location: United States

Posted: April 09, 2004 at 7:19 AM / IP Logged

desh187 wrote:

if your alarm has positive output,then just hook that wire to light GREEN/ black(+) at trunk release switch.

dude, i ust told you there IS no lt GREEN/ black wire !

pete

petesneeze

Member - Posts: 14

Joined: April 02, 2004

Location: United States

Posted: April 09, 2004 at 7:19 AM / IP Logged

desh187 wrote:

if your alarm has positive output,then just hook that wire to light GREEN/ black(+) at trunk release switch.

dude, i just told you there IS no light GREEN/ black wire !

pete

derek123

Copper - Posts: 163

Joined: October 09, 2003

Location: Canada

Posted: April 09, 2004 at 10:47 AM / IP Logged

measure both wires at the swith at rest, and while you pressing the button. logic probe is the best as it will show you both + and -.

one of the wires will change state when the button is pressed. <--- this is the money wire.

just recreate what happens on that wire while you are pressing the button.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trunk release 97 sebring convertible

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.