python lock actuators

The wires coming off of the actuator are the motor wires. You need to wire two relays like this, If your alarm has built in lock relays or are using a 451M then you would hook the purple wire to constant +12V, the brown and white to ground, and then the blue and green to the approriate wires. The blue and green wires coming from the alarm don't neccesarily have to go the actuators blue and green wires, this depends on how you mounted the actuators. If you hook it up one way and it is unlocking when you hit lock and locking when you hit unlock then flip the blue and green around.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.