tach wire gone fishing???

Home / the12volt's Install Bay / Car Security and Convenience / tach wire gone fishing??? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

drtoofast

Member - Posts: 12

Joined: June 01, 2004

Location: United States

Posted: June 05, 2004 at 8:33 PM / IP Logged

Ok I will be the first to say imports and me dont get along. Never had and never will.

I can not find the tach wire on my wife’s 1997 Lexus. It’s a 6 cylinder and I was told it should be located at the ignitor on a bracket just in front of drivers side strut tower with the module having the name denso on it.. well my lexus has nothing of the sort on it that I can find. Is it possible to tie into a wire where it meets the gauge cluster on the dash?

My alarm/remote start unit that I am trying to tie in is a valet 554r and I am under the understanding that it has to have this connection for the remote start to function properly. Any of you pro’s have a cure so that I can be done with this little project?

Thanks

If it too fast your Too old...

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: June 05, 2004 at 9:30 PM / IP Logged

there will be an ignitor labeled, "DENSO, ignitor" hear the strut tower. the ignitor is a square box w/ a harness.

try using voltsense if you cant find the tach wire. toyotas works fine w/ voltsense(tachless mode).

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tach wire gone fishing???

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.