vats bypass

Home / the12volt's Install Bay / Car Security and Convenience / vats bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ShaunD912

Copper - Posts: 140

Joined: July 09, 2002

Location: United States

Posted: September 17, 2002 at 11:18 AM / IP Logged

Hello,

I am planning to install an add on remote starter in a 95 or 96 (can't remember) Impala SS. It has the vats security system on it. I was planning to use a relay and resistors. I know to check the resistance of the key. My question is in wiring the relay. Ok, here's what I got:

85 - remote start output

86 - 12v

87a - switch side of vats wire

30 - starter side side of vats wire

87 - ?

I know i need to put the resistor on the 87 pin. The only thing I was wondering is if it's resistance to ground or 12v? How do I wire pin 87?

Also does anybody know what color the vats wire is in this vehicle.

Thanks.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 17, 2002 at 3:14 PM / IP Logged

85 : GROUND OUT WHEN RUNNING WIRE from alarm
87 : Uncut wire from the two VATS wires with resistor pellet
86 : Primary Ignition ( NOT CONSTANT )
30 : Keyside of VATS wire
87a: Computerside of VATS wire

Here's the diagram if you need more help: https://www.the12volt.com/uploads/files/GMVatsPassKey.gif

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

ShaunD912

Copper - Posts: 140

Joined: July 09, 2002

Location: United States

Posted: September 17, 2002 at 10:05 PM / IP Logged

thanks velocity

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 18, 2002 at 5:20 AM / IP Logged

No problemo vats bypass -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vats bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.