the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Factory security Grand Prix & RS

Home / the12volt's Install Bay / Car Security and Convenience / Factory security Grand Prix & RS (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
sshoureas 
Member - Posts: 4
Member spacespace
Joined: August 23, 2004
Location: United States
Posted: August 23, 2004 at 9:39 AM / IP Logged  
I have a CrimeStopper RS999FM in my 2002 Grand Prix. The problem is that using the factory security system in conjunction with the Remote Start seems clunky. In talking with CrimeStopper tech support I need to do something like enable the factory security before exiting hte vehicle, then close the drivers door then remember not to lock the doors if they are already locked otherwise the alarm will go off. This won't do much to make me popular with my neighbors. Is there a more "seamless" way to make the factory security system work with the 999FM unit? For now, I have the factory security disabled.  
sshoureas 
Member - Posts: 4
Member spacespace
Joined: August 23, 2004
Location: United States
Posted: August 24, 2004 at 11:42 AM / IP Logged  
Anyone have any ideas on this ? I appreciate any help anyone can provide ......
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 24, 2004 at 1:14 PM / IP Logged  
Do you have keyless entry on the system with the OEM security ? Doesn't the OEM alarm Remote FOB already arm the car when you lock the doors ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
sshoureas 
Member - Posts: 4
Member spacespace
Joined: August 23, 2004
Location: United States
Posted: August 24, 2004 at 2:04 PM / IP Logged  
I am using hte keyless entry feature on the Crimestopper unit in place of the OEM system. I chose this instead of an add-on system primariy due to the range of the aftermarket system and the 2 way paging capability that will inform you of a sucessful start, etc. The trouble I am having is the integration of hte factory content theft system and hte RS999FM seems awkward as my original post details. Can this be fixed ?? 
NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: August 24, 2004 at 5:06 PM / IP Logged  
All you need to do is hookup the factory alarm disarm (-) wire from your crimestopper unit to the factory alarm disarm wire in the car (ORANGE / black, (-) @ drivers kick panel or door boot harness). This way anytime you attempt to use the crimestopper unit it will disarm the factory alarm and take care of your problem. Good luck,
Mike
sshoureas 
Member - Posts: 4
Member spacespace
Joined: August 23, 2004
Location: United States
Posted: August 25, 2004 at 5:59 AM / IP Logged  

Mike,

My problem is ARMING not DISARMING the factory security. As my originial post states, the arming sequences are weird and according to CS Tech support, if I arm the factory security while the door is open then close the door I have to remember not to lock the doors again while factory security is set or the alarm will go off. The integration of my RS and hte factory security seems clunky. For now, I have the OEM security disabled and all is well and my neighbors still like me.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 25, 2004 at 8:52 AM / IP Logged  

The OEM arm is a TAN (-) wire at the driver's door pin at the BCM. This is all the information that my datasheet tells me. This is for the 2 and 4 door models.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 15, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer