2004 maxima remote start install

Home / the12volt's Install Bay / Car Security and Convenience / 2004 maxima remote start install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nuconcepts

Member - Posts: 4

Joined: August 18, 2004

Posted: September 08, 2004 at 2:00 PM / IP Logged

Looking for the diagram to install a 3300 Avi-start made by DEI, thanks!

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 08, 2004 at 4:55 PM / IP Logged

Avital 3300 Install manual.

04 Nissan Maxima

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

nuconcepts

Member - Posts: 4

Joined: August 18, 2004

Posted: September 28, 2004 at 8:58 PM / IP Logged

You are my god!!!! I did not even read this before i posted, but you rule. Does the 555 need to be a 3 wire one (red-blue-white) or just a signal from the coil with two wires? Thanks again...Any thing funny with this one, I've done many others, first maxima

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 28, 2004 at 9:10 PM / IP Logged

The Maxima uses 2 starter wires, unlock requires 2 pulses, and the universal bypass module.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

nuconcepts

Member - Posts: 4

Joined: August 18, 2004

Posted: September 28, 2004 at 9:17 PM / IP Logged

so 12v+ and the trigger, No key sence......How long you think for the avrage installer? Easy to get the pannel off from the door for the locks?, Thanks for all your help you rule!!!!

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: September 29, 2004 at 12:37 AM / IP Logged

You can get the doorlocks inside the car. I did it on an 05 Maxima yesterday (with factory alarm), It requires you to add 2 wires to the BCM where there are empty pins. Check out http://www.carsound.com/UBB/ultimatebb.php?ubb=get_topic;f=3;t=002070 for details.

nuconcepts

Member - Posts: 4

Joined: August 18, 2004

Posted: September 29, 2004 at 1:31 AM / IP Logged

Now if they onlky had a tach signal inside the car.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 maxima remote start install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.