1988 Toyota supra alarm help

Home / the12volt's Install Bay / Car Security and Convenience / 1988 Toyota supra alarm help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

na88

Member - Posts: 4

Joined: October 09, 2004

Posted: October 10, 2004 at 2:39 PM / IP Logged

1988 Toyota supra alarm help -- posted image.

Hey guys i just got this alarm its from out of country russia?.. i had a few questions about it.. since the instructions use different terms its really hard for me to understand since this is my first time putting an alarm..

im really confused about the relay and the automatic door lock wire the relay has 4 wires 2 green 1 white and 1 yellow..the diagram that came wite the instructions are really confusing where do these 4 wires go for the relay? it shows one yellow wire leading to the relay but im confused.. ?

.. next thing i dont understand is the automatic door lock wire how excatly do i hook that up.. i got the wiring diagram from this site it says door trigger is RED / white.. door lock is grn / YELLOW.. door unlock is blue/black.. now which does the blue wire(from above) go to from the above digram?

any help is appreciated please try to be as detailed as possible since this is my first time puttinn an alarm.. also do i have to disable the factory alarm before putting this new one in factory disarm wire is purple / YELLOW should i cut that first? thanks a lot...

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 10, 2004 at 3:44 PM / IP Logged

White = Unlock

WHITE/ Black = Lock

Yellow & Yellow/Black = Ground

Other wires R not used

Power Lock	GREEN/ YELLOW (-)	DRIVER KICK
Power Unlock	BLUE/BLACK (-)	PANEL

The Green wires R for Ignition "Kill" or Interrupt

Don't Learn from Others Mistakes

You Might Be the One That Knows.

na88

Member - Posts: 4

Joined: October 09, 2004

Posted: October 10, 2004 at 4:11 PM / IP Logged

1988 Toyota supra alarm help -- posted image.

im sorry im little confused does that look right?

na88

Member - Posts: 4

Joined: October 09, 2004

Posted: October 10, 2004 at 4:39 PM / IP Logged

Also what about the blue wire from diagrom on top.. it says negative trigger of switch of side door.. does that go to door trigger(RED / white)..? thanks a lot..

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: October 10, 2004 at 5:07 PM / IP Logged

One more time:

White = Unlock ( Blue / Black in Car)

WHITE/ Black = Lock (Green / Yellow in Car

Yellow & Yellow/Black = Ground ( To chassis Ground )

Other wires R not used ( NOT USED ):

Orange, Yellow, ORANGE / Black, Yellow/Black = NOT USED

Don't Learn from Others Mistakes

You Might Be the One That Knows.

na88

Member - Posts: 4

Joined: October 09, 2004

Posted: October 10, 2004 at 5:23 PM / IP Logged

yea i got it working thanks a lot MO.. appreciate it..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1988 Toyota supra alarm help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.