$10 first to answer door lock?

Home / the12volt's Install Bay / Car Security and Convenience / $10 first to answer door lock? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jc9995

Member - Posts: 14

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 4:47 PM / IP Logged

I too will paypal the first to answer this.

I have a factory keyless entry system. I purchased a remote starter that integrates with a factory keyless entry system. untilizing your factory remotes, and installing the remote starter properly, the starter sees 3 pulses from the door lock wire(pressing the remote lock button 3 times) then starts the remote start sequence. The remote starter did not come with remotes. I need to send it a negative signal 3 times in order for it to work. Since I dont know how to GET a signal from a single wire lock system, thats where my problem is.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 27, 2004 at 4:51 PM / IP Logged

What vehicle is this for ? A Chrysler or a GM ? As long as you get a (-) signal from the single wire by pressing the LOCK button 3 times in a row, the remote starter will work. It doesn't have to be separated for the remote start to distinguish between the lock and unlock because it requires 3 pulses. Wire up the single wire lock/unlock to the activation wire of the remote starter and it should work.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jc9995

Member - Posts: 14

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 4:55 PM / IP Logged

it is on an 04 dodge ram. I will try this, thanks. If it works your $10 richer.

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: November 27, 2004 at 5:21 PM / IP Logged

JC9995, If this works both draaach and velocity should get the $10. I notice you had post this twice and draach answer on the other one and velocity answer on this one! $10 first to answer door lock? -- posted image.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: November 27, 2004 at 5:22 PM / IP Logged

If it doesn't then you can always tag the lock motor wire and use a relay to convert it from positive to negative. The lock motor wire is lt. green in the white plug in the driver's kickpanel. Then use this diagram.

$10 first to answer door lock? -- posted image.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

jc9995

Member - Posts: 14

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 5:27 PM / IP Logged

I will look into this. So far nothing else has worked. Are you sure it would be in the drivers kickpanel? or in the drivers door? This may be my only option. Also, looks as though Velocity, If this had worked, beet out Draach by 1 minute. $10 first to answer door lock? -- posted image.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: November 27, 2004 at 5:30 PM / IP Logged

It will be in the driver's kickpanel in the harness going into the door. It will also be in a large white plug under the main junction box to the left of the brake/clutch pedal.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 27, 2004 at 5:33 PM / IP Logged

jeff is already RICH! he doesnt need the money....he said he would donate the money to his favorite charity....ME! lol lol lol

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

jc9995

Member - Posts: 14

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 11:11 PM / IP Logged

Wel folks we have a winner! auex not only told me how to do it, but gave me the location and wire color to boot! Hopefully he will be sending me his email address soon so I can keep my word. Thanks to all for your help. I really appreciate your time!

forbidden

Platinum - Posts: 5,353

Joined: November 01, 2003

Location: Alberta, Canada

Posted: November 28, 2004 at 2:07 AM / IP Logged

Damn, where was I when this was going on. $10 first to answer door lock? -- posted image.

Top Secret, I can tell you but then my wife will kill me.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.