2001 Astro van passlock by-pass?

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Astro van passlock by-pass? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jfcaac

Member - Posts: 1

Joined: November 29, 2004

Posted: November 29, 2004 at 9:16 PM / IP Logged

Is there a "simple" way to disconnect the passlock system

so my remote start will work? They say 5 volts pass up

one wire & down the next when the key is in. Can these two wires just be cut and crimped together ?

Thanks!

rhaugen

Member - Posts: 4

Joined: November 21, 2004

Location: Canada

Posted: November 29, 2004 at 9:22 PM / IP Logged

I don't believe that there is. I just installed a remote starter in my 1998 gmc truck and had to buy the bypass module. When I installed the module you had to check for resistance between the two wires and set 10 dip switches according to what the readings were. Good luck.

Ray Haugen

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Astro van passlock by-pass?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.