Gathering Info for install

Home / the12volt's Install Bay / Car Security and Convenience / Gathering Info for install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ranch

Member - Posts: 2

Joined: October 20, 2002

Location: United States

Posted: October 20, 2002 at 9:13 PM / IP Logged

I'm trying to gather as much information as I can before I go ahead and try to put in a remote start system on my 95 Monte Carlo.

What system seems to work best with these cars? (the Megadyne Marksman M10 was suggest in another post and I kinda liked the features it offered..)

I know that I'll need the passkey module, but is there any other speacial stuff that I'll need to get?

Is there any speacial tricks that I'll need to know about before hand? (like what kinda window system do I have, because I'd like to put the window module in..)

Where is the best place to pick all this stuff up from? (I'm sure that it'll have to be from the net, because there aren't any local dealers for any of this stuff..)

Thanks for your input! I'm sure that I'll be back for some more help! I'm really glad that I found this site. It has a TON of information!!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 21, 2002 at 7:35 AM / IP Logged

Thing to look for on remote starter's is the GROUND OUT WHEN RUNNING wire , you need this conncetion for Passlock bypasses and also for 2nd ignition relays. You wanted power window controls modules as well so make suer that the unit you are buying has at least two AUX channels for trunks release and one for the windows up or down. You can also install the wondow modules to the starter disable circuit so that it will roll up the windows when the system is armed. Here is the wiring chart for your car:

| 12V|red |+ |ignition harness |

| SPEED SENSE|dk. green |4 |ECM |

Notes:

*1 Also found low in the drivers kick panel. *2 Only found on some models. A pinswitch must be added on all others. *3 Also located at the ECM at right inner fender forward of the strut tower.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

ranch

Member - Posts: 2

Joined: October 20, 2002

Location: United States

Posted: October 21, 2002 at 8:58 AM / IP Logged

Thanks for you help Jeff! Anything else to look out for anybody?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Gathering Info for install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.