bypassing factory alarm 98 Camry

Home / the12volt's Install Bay / Car Security and Convenience / bypassing factory alarm 98 Camry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tazmoe

Member - Posts: 14

Joined: December 28, 2002

Posted: January 04, 2005 at 6:40 AM / IP Logged

Is there a kit I need to bypass the factory alarm wiring? I have a 98 Toyota Camry with the factory installed alarm. I'm interested in installing a aftermarket alarm.

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: January 04, 2005 at 7:59 AM / IP Logged

You can use PKT from bypass.com to bypass your oem transponder or one of the DEI mod.

Toyota

Camry

1997-2001

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	RED	IGNITION SWITCH HARNESS **
Ignition #1:	BLACK/ RED	IGNITION SWITCH HARNESS
Ignition #2:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	BLUE/RED	IGNITION SWITCH HARNESS
Brake Light:	GREEN / WHITE	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	BLACK ORANGE	AT ECM OR IGNITOR *
Parking Lights:	GREEN (+)	AT # PIN WHITE CONN. AT FUSE PANEL
Headlights:	RED / YELLOW (-)	AT HEADLIGHT SWITCH
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* ECM Is Located Behind The Glove Box. ** Beginning in 1998, this vehicle is equipped with a transponder type of theft system. See Installation Note #144 - Bypassing Transponder Theft Systems.

Toyota

Camry

1997-2001

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ RED & WHITE	IGNITION SWITCH HARNESS
OEM Alarm Disarm:	RED / GREEN (-)	# PIN CONN IN DRIVER'S KICK PANEL
Dome Lights/Superv:	RED / WHITE (-)	7 PIN WHITE CONN. ABOVE FUSE PANEL
OEM Horn:	GREEN/ BLACK (-)	IN STEERING COLUMN HARNESS
Power Lock:	LIGHT GREEN (-)	# PIN CONN IN DRIVER'S KICK PANEL ***
Power Unlock:	DARK GREEN (-)	# PIN CONN IN DRIVER'S KICK PANEL ***
Trunk Release:	N/A
Alarm Input Wire:	RED / WHITE (-)	7 PIN WHITE CONN. ABOVE FUSE PANEL
Notes:	** Child Safety Wire is BLUE/RED (-) in same connector as door locks. See Note # 209 - Child Safety Door Lock Diagr

tazmoe

Member - Posts: 14

Joined: December 28, 2002

Posted: January 04, 2005 at 12:23 PM / IP Logged

Where is this bypass.com site? When I put in the url I get some spammer's site.

mobileworks

Copper - Posts: 136

Joined: December 16, 2004

Location: United States

Posted: January 04, 2005 at 12:35 PM / IP Logged

The only thing available for that car is a transponder bypass....if your car is equipped with it.

You can use a universal transponder interface or the code alarm hpkt for toyota / lexus.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypassing factory alarm 98 Camry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.